Cornelius Door Latch User Manual download pdf

Door Latch Assembly Installation Instructions

INSTALLATION INSTRUCTIONS

REMOVAL AND INSTALLATION OF DOOR LATCH ASSEMBLY QUEST

NOTE: Removing the existing door catch/switch with the replacement catch will remove the auto-

matic sold out reset function of the machine. This feature can still be used or totally defeated

depending on users preference.

OPTION 1: By removing the existing switch and not jumping the board the sold out will work, but not

reset unless the pump door switch is manually reset after each refill. If the switch is not manually reset

the light will not go out even after installing new product.

OPTION 2: To disable the sold out feature jumpers are added to the control board in the sold out plug

location. The sold out will now be disabled and never come on.

Installation of these options are described below.

Parts List

Tools Required

• Hex Screw Driver

• Electrical Tape

Description Part Number Qty

Bracket 720201471 1

Sold Out Jumper Board 11749 4

Jumper Switch 720302204 1

Spacer 720705306 1

Screw Plastic #8 x ¾” 07015001 2

Screw 6-32 x 3/8” 0700203 2

Washer .145x.5x .03 07301043 2

Screw 6-32 x 1/4 0700201 2

Latch 720532112 1

Catch 720202415 1

FIGURE 1

Revision Date: June 30, 2004 www.cornelius.com Revision: C

1 2 3 4 5 6

Page 3

Page 4

Page 5

No comments

Cornelius Door Latch User Manual