Cornelius QUEST 4000 Service Manual download pdf (Page 12)

Quest Elite 4000 Service Manual

CONCENTRATE HANDLING AND LOADING

It is recommended that the concentrate be thawed in a refrigerated 35°F to 40°F

(1.6°C to 4.4°C) compartment for a minimum of 48 hours prior to loading it into the

Quest Juice Dispenser.

WARNING:

Concentrate must be completely thawed and within the temperature range of 35°F

to 40°F (1.6°C to 4.4°C) prior to loading. Failing to supply concentrate inside the

recommended temperature range, especially below 35°F (1.6°C), causes an out

of BRIX drink (refer to the BRIXing Procedure section for details).

LOADING CONCENTRATE

The Quest Juice Dispenser is designed to use either disposable juice concentrate

containers or the optional Cornelius generic refillable container (sold separately).

Figure 2. Refillable Concentrate Container

1. Thoroughly shake concentrate container prior to use.

2. Place concentrate containers on the dispensing platform shelf inside the

refrigerated cabinet.

3. Engage the concentrate container by pressing it downward into the bottle

adapter opening on the dispensing platform.

NOTE: Be sure to lubricate the o-ring seal on the container nozzle.

This ensures a good seal and allows the pumps to draw

concentrate from the containers more easily. Failure to create

a good seal at this connection may result in weak drinks and/or

seepage of concentrate.

4. Prime each pump by closing the cabinet door and press each dispense

button until concentrate flows from the dispense nozzles.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

No comments

Cornelius QUEST 4000 Service Manual Page 12